Window tints improve a car’s aesthetics and protect car drivers from the sun’s harmful UV rays and reduce the solar heat coming in the vehicle, allowing it to maintain a cool temperature.
Car owners will immediately get the benefits window tints offers. Aside from protection and comfort, these also provide security and privacy. However, in certain cases, some may have concerns about bubbles appearing on their tints.
Bubble formation between the car window and tint can be a potential threat to you and your passengers when on the road as it can make it difficult for you to have a clearer view of what’s outside. But, before questioning whether it was worth it or not to have had your windows tinted, you should understand that different factors cause bubbles to form, and there are various ways to eliminate the bubbles present on your car windows.
Different types of bubble formation on window tints and why they occur
Bubbles occur because of soap, air, water, or dirt between the car window and tint film.
Soap/air bubbles and dirt and contamination bubbles occur when the window tint film is installed on windows that are not properly prepared and cleaned. Soap/air bubbles usually get smaller as the tint cures, but they do not completely diminish. In contrast, dirt and contamination bubbles tend to get larger as the film cures. When these types of bubbles occur, it is best recommended to have the windows re-tinted.
Moreover, water bubbles are normal after the tint’s application and often go away as the film cures.
How to Remove Bubbles on Window Tints?
Bubble formation can happen to old and new tints. If your window tints are old, it is advisable to have the window re-tinted with new dyes. But, if your tints are still new and you want to remove the bubbles forming, here is how you can remove them on your own:
Step One: Prepare the supplies you will use.
In removing the bubble formation from your tints, you will need a hairdryer, safety pin, soap, water, spray bottle, and a squeegee.
Step Two: Apply heat.
Use a hairdryer to apply heat to the tint film. Warming the window’s surface where the tint is applied can make it easier to remove the bubble forming. The heat weakens the adhesive and softens the dye, making it easier to manipulate the window tints.
Step Three: Get the window and tint moist.
After exposing the car windows to heat, spray a mixture of soap and water on the area you want to repair. The soap and water solution weakens and allows the tint’s adhesive to be malleable.
It is important to keep the window tint hydrated throughout the process by spraying the solution. You only need to get the window moist but avoid it from getting soaking wet.
Step Four: Poke a small hole in each bubble.
Use a safety pint or a needle to prick a small hole in the center of the bubbles you want to remove. You have to be extra careful when doing this, or you might end up tearing the whole window film and end up scratching the glass window.
Step Five: Smooth out the bubbles.
The final step is where you have to press the bubbles out of the window tint. To do so, slightly re-heat the window film and use a squeegee, or if you do not have one, a hard plastic card to get the air or water out of the bubbles. Do this gently, as too much pressure can tear the film.
How to Prevent Bubble Formation on Window Tint?
The best action to protect your window tints from bubble formation is to prevent them from developing bubbles right at the beginning. It would be best to be proactive at choosing the quality of window tints you want to be installed on your car. The better the quality, the less likely bubble formation is to happen.
Accordingly, having the tints installed by professional window tinters who are highly trained and skilled and have the proper tools to apply window tints can prevent problems, such as bubble formation, from occurring.
If you want to have window tints installed, you can always go to reliable window tinting companies like Global Tint UK. Global Tint offers a wide range of tints for your vehicle. If you want to have the best tints today, you can visit our website at https://globaltint.co.uk/.
Source:
https://www.raynofilm.com/blog/tips-for-removing-window-tint-bubbles
